BMC Charger Demon Styled Beast Ram Air Hood 2015-2023
| |||
Unleash the Beast within. Taking the design of your 2015-2023 to the next level is BMC Extreme Customs' performance Ram Air Hood called the Beast. Bigger always means better with this hood. The massive true ram air scoop grabs the air and pushes it through for an increase in airflow and horsepower in highway speeds. The scoop collects so much air it has an insert with the support that we designed and implemented into the hood for a finished OE style finish. Not wanting to stop there, BMC utilized the design to add clearance for the largest surchargers. So whether you are cruising on an SXT, wanting to add a supercharger to the Scat Pack, or upgrading the supercharger on your SRT Hellcat, this hood has what you want. This fiberglass hood requires prep, prime, and paint. But due to BMC's use of a vinyl-ester resin system that exceeds the quality demands of the automobile industry, this means shrinkage and heat distortion are nonexistent. Additionally, the resin is easily dispensed into a laminate allowing for even consistent fiber compacting and air dispersal, so less prep work is required than most aftermarket hand-laid fiberglass hoods. This fits all bumpers for the 2015-2023 Chargers but is made specifically for the SRT/392/Hellcat/Scat Pack Bumper. There are slight differences in the bumpers that can show up in the fitment on a non-SRT/392/Hellcat/Scat Pack Bumper. AVAILABILITY Made to Order: Typically ships in 5-7 Business Days Shipping: This item is large and ships LTL freight Dimensions are 74"L x 10"W x 60" H, SW 45LBS Heat Extraction Option If your car is needing additional heat extraction, we have included the option of creating additional vents underneath the hood in order to provide great air escape. The Heat Extraction Option cannot be seen from the top of the hood. Below are pictures of the hood with the optional heat extraction venting setup.  FITMENT NOTE: In order to achieve improved strength for the hood scoop, additional layers of fiberglass are added. This creates a 1/8"-3/16" rise over the standard hood on the front of the scoop. For an absolute straight front bumper to the hood, the Charger latch will need to be lowered the same to compensate for the difference. CANADA DELIVERY: Includes Tariffs and Broker Fees. Shipping costs to other remote areas in Canada may be additional in which we will call you for confirmation.         Important When Receiving Freight: upon receiving the product(s) please be sure to inspect the item(s) for "freight damage". If there are signs of freight damage you must refuse the item due to damage then contact us immediately. Make sure to open and inspect all content(s) before signing [this includes removing the wrapping bubbles and plastics to physically inspect the item(s)]. This process usually takes about 5-10 minutes. It is the customer's responsibility to inspect the item thoroughly. If a customer fails to fully open up the box(es) and inspect their merchandise for damage, and signs the freight carrier's paperwork indicating that all merchandise was inspected (which is what is stated on all freight carriers paperwork), inspects their merchandise after the freight carrier leaves and then finds damage, or what is called "concealed damage", neither the freight carrier, nor BMC Extreme Customs will be responsible to replace or pay for repairs to the product. CargoEdge Insurance Coverage Due to the size of the hood, they are vulnerable to getting damaged. It’s a common mistake to confuse freight insurance with the liability insurance provided by carriers and freight forwarders. They are not the same at all. Typical carrier or forwarder liability is limited, in some cases to no more than $5.00 per lb of stolen, lost, or damaged cargo, and coverage contains many exclusions. For a typical hood which weighs less than 50lbs, that's only $250 plus freight. CargoEdge Insurance is powered and backed by UPS Capital and adds a piece of mind should your order arrive damaged or stolen. | |||
Accessories
