2016-2023 Chevrolet Camaro Ram Air Hood | RKSport

The Gen6 generation Camaro hood from RKsport is the latest in aftermarket hoods for the 2016-2023 Camaro SS and Camaro RS models.

This aftermarket custom Camaro Gen6 Ram Air Hood gives you a new aggressive look with performance styling, just add a cold air intake to make it fully functional. The hood sends cool dense air directly over your stock air box and extracts engine heat for optimal performance. This ships prepped in a gray gel coat ready for paint. Installs using the stock hardware.

AVAILABILITY
Made to Order In USA 2-3 Weeks







MPN 40014000

Questions and answers?

DO THE HOODS SHIP 'PAINT READY'? Yes, your truck hood will arrive sealed in a premium quality, gray, gel coat. We recommend a light sanding prior to applying primer and paint.

HOW DIFFICULT ARE THE HOODS TO INSTALL? RKSport makes it easy! Disconnect the struts, wiper nozzle tubing and engine compartment lamp. Unbolt the hood from the hinges and remove the hood from the vehicle. Remove all stock hardware from the stock hood and re-install onto the RKSport Hood. The F-150 has multiple adjustment points to assure a perfect fit. We strongly recommend pre-fitting your new hood prior to painting. This will greatly reduce the chance of marring the hood once it is painted.

WILL WATER GET INTO THE ENGINE THROUGH THE RAM AIR SCOOP? RKSport has developed an effective water management system for all our Ram Air hoods to prevent any water that enters the scoop from making it to the intake. The water is ultimately directed weep holes that allow the water to exit the hood away from the intake and engine.

CAN I RE-INSTALL THE STOCK HOOD LINER ON THE NEW HOOD? It is possible but you would need to modify it to make it work. RKSport Hoods do not require a hood liner. The primary purpose of a hood liner is to protect the paint from engine heat. The double walled construction of our hoods, combined with the natural ability of fiberglass to dissipate heat offer more than adequate protection.

Important When Receiving Freight: upon receiving the product(s) please be sure to inspect the item(s) for "freight damage". If there are signs of freight damage you must refuse the item due to damage then contact us immediately. Make sure to open and inspect all content(s) before signing [this includes removing the wrapping bubbles and plastics to physically inspect the item(s)]. This process usually takes about 5-10 minutes. It is the customer's responsibility to inspect the item thoroughly. If a customer fails to fully open up the box(es) and inspect their merchandise for damage, and signs the freight carrier's paperwork indicating that all merchandise was inspected (which is what is stated on all freight carriers paperwork), inspects their merchandise after the freight carrier leaves and then finds damage, or what is called "concealed damage", neither the freight carrier, nor BMC Extreme Customs will be responsible to replace or pay for repairs to the product.

CargoEdge Insurance Coverage
Due to the size of the hood, they are vulnerable to getting damaged. It’s a common mistake to confuse freight insurance with the liability insurance provided by carriers and freight forwarders. They are not the same at all. Typical carrier or forwarder liability is limited, in some cases to no more than $5.00 per lb of stolen, lost, or damaged cargo, and coverage contains many exclusions. For a typical hood which weighs less than 50lbs, that's only $250 plus freight. CargoEdge Insurance is powered and backed by UPS Capital and adds a piece of mind should your order arrive damaged or stolen.