2015-2023 Dodge Charger Killer Bee Ram Air Hood

If you think the 2015-2023 Dodge Charger Killer Bee Ram Air Hood looks just like the Killer Bee Heat Extraction Vented Hood then you are correct! We kept the same original design of the Killer Bee Extraction Hood and put a built-in rain tray underneath. What this allowed us to do is make the front scoop a functional ram air while still keeping some of the heat extraction function. Underneath the hood has 1" additional clearance from stock. This hood still helps with cooling with its built-in underneath extraction located in the back of the hood. This was made with three main points: aggressive design; ram air performance, and keep heat extraction capabilities.

FITMENT NOTE: This fits all bumpers for the 2015-2023 Chargers but is made specifically for the SRT/392/Hellcat/Scat Pack Bumper. There are slight differences in the bumpers that can show up in the fitment on the standard SXT/RT bumper. The Dodge Viper styling has been desired for many years and has been popular on the Dodge Charger since 2005-up. BMC has decided to add more aggression to the styling calling out with a larger hood scoop to create our new Dodge Charger "Killer Bee" heat extractor hood.




Note: For safety purposes, hood pins are required for ALL aftermarket hoods.


This Charger Aftermarket Hood Features
*Functional Ram Air that dumbs air on top of airbox
*Hot Air Escapes Custom Rear Channel Underneath Hood
*Hand Laid Fiberglass
*Smooth Gel Coat Finished Both on Top and Bottom Sides
*Reinforced Metal Latch & Hinge Plate For Additional Safety
*Direct Bolt-on Using OEM Hardware
*Integrated Stainless Mesh Grille
*Pre-Drilled Prop Hole
*Approximate Weight: 30 Pounds
*Proudly Made in the USA



Questions and answers? DO THE HOODS SHIP 'PAINT READY'? The hoods do not come primered like OEM Hoods. BMC's Killer Bee Charger hoods will arrive sealed in a premium quality gel coat. We recommend baking and sanding prior to applying primer and paint. Click here for installation and prep instructions!

HOW DIFFICULT ARE THE HOODS TO INSTALL? BMC makes it easy! Disconnect the struts, wiper nozzle tubing and engine compartment lamp. Unbolt the hood from the hinges and remove the hood from the vehicle. Remove all stock hardware from the stock hood and re-install onto the BMC Hood. The Charger has multiple adjustment points (e.g. latch area, fenders and hinges) to assure a perfect fit. We strongly recommend pre-fitting your new hood prior to painting. This will greatly reduce the chance of marring the hood once it is painted.

WILL WATER GET INTO THE ENGINE THROUGH THE RAM AIR SCOOP OR VENTS? BMC's manufacturing has developed an effective water management system for all our Ram Air hoods to prevent any water that enters the scoop from making it to the intake. The water is ultimately directed weep holes that allow the water to exit the hood away from the intake and engine.

CAN I RE-INSTALL THE STOCK HOOD LINER ON THE NEW HOOD? It is possible but you would need to modify it to make it work. BMC Hoods do not require a hood liner. The primary purpose of a hood liner is to protect the paint from engine heat. The double walled construction of our hoods, combined with the natural ability of fiberglass to dissipate heat offer more than adequate protection.


Availability:
MADE TO ORDER :Ships in 1-2 Weeks

Important When Receiving Freight: upon receiving the product(s) please be sure to inspect the item(s) for "freight damage". If there are signs of freight damage you must refuse the item due to damage then contact us immediately. Make sure to open and inspect all content(s) before signing [this includes removing the wrapping bubbles and plastics to physically inspect the item(s)]. This process usually takes about 5-10 minutes. It is the customer's responsibility to inspect the item thoroughly. If a customer fails to fully open up the box(es) and inspect their merchandise for damage, and signs the freight carrier's paperwork indicating that all merchandise was inspected (which is what is stated on all freight carriers paperwork), inspects their merchandise after the freight carrier leaves and then finds damage, or what is called "concealed damage", neither the freight carrier, nor BMC Extreme Customs will be responsible to replace or pay for repairs to the product.

CargoEdge Insurance Coverage
Due to the size of the hood, they are vulnerable to getting damaged. It’s a common mistake to confuse freight insurance with the liability insurance provided by carriers and freight forwarders. They are not the same at all. Typical carrier or forwarder liability is limited, in some cases to no more than $5.00 per lb of stolen, lost, or damaged cargo, and coverage contains many exclusions. For a typical hood which weighs less than 50lbs, that's only $250 plus freight. CargoEdge Insurance is powered and backed by UPS Capital and adds a piece of mind should your order arrive damaged or stolen.


Shipping:
This item is large and ships LTL freight
Dimensions are 72"L x 10"W x 65" H
Total Shipping Weight 50 lbs (includes Packaging)